Steps
BEFORE YOU REPAIR, make sure you write down your computer name, IP Address if necessary. Backup database that is needed.
1. Set from bios to first boot from CD-ROM
- Press Button DEL or F1 ( To enter bios)
- set priority boot from CD-ROM
2. Insert Windows CD to CD-ROM
3. Press ENTER when it ask you to boot from CD
4. Wait until it ask you to press ENTER to continue
5. Press F8 to agree with the agreement.
6. It will try to detect current windows in your pc
7. It will highlighted the current windows in your pc
8. Press R to repair your windows
9. Follow the windows setup instruction until the process complete.
Tuesday, June 24, 2008
Friday, June 20, 2008
Help needed on video card question
"My knowledge on graphics cards is pretty poor, so any help would be much appreciated!"
I got the same problem when i just bought new laptop from dell.
What i did is, download the Graphic Driver from dell website at www.dell.com.
1) Uninstall my graphic driver. You can use device manager to uninstall it.
2) reinstall back your graphic driver.
3) it will solve your poor graphic!
I got the same problem when i just bought new laptop from dell.
What i did is, download the Graphic Driver from dell website at www.dell.com.
1) Uninstall my graphic driver. You can use device manager to uninstall it.
2) reinstall back your graphic driver.
3) it will solve your poor graphic!
LinkSys Issues
Having some issues logging into my WRT54G LinkSys wireless router. My roommate set the password and now cant remember what it is. Any ideas on resetting the router?
*************************************************************************************
solution:
1) look at small hole near to power button on your router.
2) use a pen or pencil to press and hold it about 5 second. Then release it.
3) this will reset you router. To get the password and username for your router, used the router cd or type your router model and config in google.com. you will get back the default username and password.
what i found is :
Username:
Password: admin
4) for internet username and password, call your internet provider. for examples, tmnet. From home phone, dial 100 to talk to technician support. (Malaysia)
*************************************************************************************
solution:
1) look at small hole near to power button on your router.
2) use a pen or pencil to press and hold it about 5 second. Then release it.
3) this will reset you router. To get the password and username for your router, used the router cd or type your router model and config in google.com. you will get back the default username and password.
what i found is :
Username:
Password: admin
4) for internet username and password, call your internet provider. for examples, tmnet. From home phone, dial 100 to talk to technician support. (Malaysia)
Bluescreen error on Windows XP
This problem maybe cause by newly install program on your pc or other windows files in system file corrupted.
Solutions
1. Take you not less than 5 minutes if success
a) try to enter safe mode by pressing F8 after you start your pc.
b) if you able to enter windows normally, go to C:\WINDOWS\system32\Restore\rstrui.exe
c) restore your windows to earlier stage. maybe you will lost newly install program but you wont lost your important files.
2. if you fail to enter safe mode, use windows xp cd sp2.
a) set your cpu to detect from your CD-ROM from bios.
b) Press enter to start from CD-ROM, after you press F8 to agree on the agreement, wait until your cpu detect the last installed windows.
c) then, select options repair to repair your windows.
d) you will able to enter your windows after that without loosing your data.
Solutions
1. Take you not less than 5 minutes if success
a) try to enter safe mode by pressing F8 after you start your pc.
b) if you able to enter windows normally, go to C:\WINDOWS\system32\Restore\rstrui.exe
c) restore your windows to earlier stage. maybe you will lost newly install program but you wont lost your important files.
2. if you fail to enter safe mode, use windows xp cd sp2.
a) set your cpu to detect from your CD-ROM from bios.
b) Press enter to start from CD-ROM, after you press F8 to agree on the agreement, wait until your cpu detect the last installed windows.
c) then, select options repair to repair your windows.
d) you will able to enter your windows after that without loosing your data.
Run CMD and computer shutdown!
This problem caused by photo.zip.exe. virus.
Solution.
1. click start>run.
- then type gpedit.msc
2. select Administrative Templetes>system>ctrl+alt+del options
3. from remove task manager properties select disable and then exit.
4. press Ctrl+Alt+Del, end photo.zip.exe processes.
From folder option, enable show all files and untick hide extension for known file type.
if you cant see you folder option, enable your registry editor from gpedit.msc.
then, go to system32 in you windows folder, than delete photo.zip.exe file.
clear also photo.zip.exe at winlogon>userinit. DONT delete coma (,)
post your question if you dont understand.
Solution.
1. click start>run.
- then type gpedit.msc
2. select Administrative Templetes>system>ctrl+alt+del options
3. from remove task manager properties select disable and then exit.
4. press Ctrl+Alt+Del, end photo.zip.exe processes.
From folder option, enable show all files and untick hide extension for known file type.
if you cant see you folder option, enable your registry editor from gpedit.msc.
then, go to system32 in you windows folder, than delete photo.zip.exe file.
clear also photo.zip.exe at winlogon>userinit. DONT delete coma (,)
post your question if you dont understand.
Windows 2000 blue Screen!
When you faced this problem, try to enter safe mode by pressing f8 button when you start computer. If you fail to enter windows, don't panic! or waste your time to format your PC.
Find the same Windows on other computer that can work. Take out your hard disk and set as slave to that computer. You can replace hard disk in CD-ROM place.
Start the CPU, wait until computer ask you to scan your hard disk. Dont skip and wait until that computer scan and repair back your hard disk's structure.
Than, install back that hard disk to your original PC. Problem solved!!
You will enter you pc normally without losing your important data.
Find the same Windows on other computer that can work. Take out your hard disk and set as slave to that computer. You can replace hard disk in CD-ROM place.
Start the CPU, wait until computer ask you to scan your hard disk. Dont skip and wait until that computer scan and repair back your hard disk's structure.
Than, install back that hard disk to your original PC. Problem solved!!
You will enter you pc normally without losing your important data.
Subscribe to:
Posts (Atom)